top of page

Helium Leak Tester

헬륨 리크 검사기

Features / 특징
helium leak test
Nitrogen Cleaning
질소 세척
 

Our system do cleaning of chamber & work by N2(Nitrogen) in cycle time. By this cleaning, 

it is possible to keep similar BG(starting BG) even though running time is getting long.

 

사이클 타임 내에서 챔버, 워크에 대한 질소 세척으로 장시간 연속 운용 시에도 초기 가동 시와 비교해 챔버 오염도 변화가 적음

Multiple Testing
복합 검사

Large leak test (Vacuum)

대량 리크 확인(진공)

PRE1 test (Helium)

PRE1 측정

PRE2 test (Helium)

PRE2 측정

Main test (Helium)

본 측정

Master Leak Calibration 
마스터리크 교정
 

Master leak tank (actual work volume) is connected by coupler & hose inside of chamber.  This condition is including leakage of coupler & hose like actual testing in mass production. The actual leakage detected by detector becomes standard setting for judgment. Therefore the reliability is much higher than the others in testing of mass production.

 

당사 Calibration 방식은 챔버에 직접 실제 테스트 워크와 비슷한 용적의 마스터 리크 탱크와 커플러, 호스를 사용, 연결하여 실제 테스트에서 발생하는 커플러와 호스의 리크를 포함한 조건으로 디텍터에 연결, 측정하고 리크 기준값은 마스터 리크 값이 아닌 실제 디텍터가 읽은 값 그대로를 사용해 실제 테스트에서의 판정에 대한 신뢰가 높다

Lineup / 종류
Condenser / Evaporator
콘덴서 / 에바포레이터
helium leak tester for condenser & evaporator

Cycle time :                45sec

Leak Rate :                 0.01cc/min

Testing pressure :      3 or 5MPa

Gas type :                   mixing N2 90% : He 10%

 

사이클 타임:              45초

리크 기준:                  0.01cc/min

테스트 압력:              3또는5MPa

가스 타입:                 질소:헬륨 (9:1) 혼합

Heater
히터
helium leak tester for heater

Cycle time :                50sec (2core/25sec)

Leak Rate :                 0.2cc/min

Testing pressure :      0.2MPa

Gas type :                   mixing N2 90% : He 10%

 

사이클 타임:              50초(25초당 2코어)

리크 기준:                  0.2cc/min

테스트 압력:              0.2MPa

가스 타입:                 질소:헬륨 (9:1) 혼합

A/C Pipe
에어컨용 파이프
helium leak tester for a/c pipe

Cycle time :                45sec 

Leak Rate :                 0.01cc/min

Testing pressure :      0.88MPa

Gas type :                   He 100% & Recovery system

 

사이클 타임:              45초

리크 기준:                  0.01cc/min

테스트 압력:              0.88MPa

가스 타입:                 헬륨 100%, 회수장치

Recovery / Mixing unit  
회수기 / 믹싱기
Recovery Unit
회수장치
helium recovery unit

It is system that helium gas is recovered by pneumatic servo cylinder and then compress it. Helium gas recovery rate is max. 99% because this system can cover the weak points of compressor type.

 

당사 회수 장치의 경우 서보 제어에 의한 공압 실린더를 사용, 회수된 헬륨을 압축하는 방식으로 컴프레서 방식의 단점을 보완하면서 회수율을 최대 99%까지 가능

Mixing Unit
믹싱장치
helium mixing unit

In addition, user can reduce drastically consumption of helium gas because this unit use mixed gas(helium 10% & N2 or compressed air) instead of helium 100%.

 

회수 장치와 별도로 가스 혼합 장치를 사용 시 질소 (또는 압축 공기)90%, 헬륨 10%를 혼합해 공급하는 장치로 기존 100% 헬륨으로 검사 시 보다 헬륨 소비량 대폭 절감 가능

Related Parts / 관련제품
Spiral Hose
스파이럴 호스
spiral hose for helium leak tester
Master Leak
마스터 리크
master leak for helium leak tester
Coupler
커플러
coupler for helium leak tester
bottom of page